4 / 48
Hakki Pilke 43 Pro
Translation
Version 6-2018
1.
General information
1.1.
Introduction
The purpose of this manual is to ensure that the machine is used in the manner intended by the
manufacturer, taking safety into consideration. Everyone operating the machine or working in close
proximity to it must study this manual carefully.
Operators of the machine are expected to have basic skills in tractor handling, such as utilising the cardan
shaft drive and the tractor's lifting equipment. Before commencing work, operators must also familiarise
themselves with the machine's control and safety equipment, and ensure their proper operation.
Additional information on Maaselän Kone Oy’s products is available on our website at
www.hakkipilke.fi
.
Keep this manual in the immediate vicinity of the machine.
1.2.
Purpose of use
The Hakki Pilke 43 firewood processor is designed for preparing firewood from pruned wood or logs. The
firewood processor must not be used to process any treated wood, such as is found in construction
waste. Sand, nails or other impurities in the wood may damage the machine.
The maximum diameter of the logs to be processed is 43 cm. This limit must not be exceeded. When
estimating the diameter of the log you are about to cut, note that the shape of the log and other factors,
such as branches and burrs, make the actual diameter larger, and may prevent the log from being fed into
the machine. The splitting groove is designed for logs up to 60 cm in length. Never cut or split logs that
exceed the maximum length.
1.3.
Machine models and basic information
Model
TR
Combi
Driving power
Tractor’s cardan shaft (PTO)
PTO
Electrical
Weight
1,400 kg*
1,650 kg*
PTO/Electrical drive
min 35 hp /
max 500 rpm 15kW (min 32 A, type C fuse)
Height/width/length
in the transport position 2,500/2,460/1,300 (mm)
In-feed/out-feed
conveyor
2,200/4,000 (mm)
Saw bar/chain
bar: 18” groove 1.6 mm chain: 68 loops, pitch 0.404”
Max log diameter
43 cm
Max/min log length
Log max 60 cm; min 20 cm
*weight with standard conveyor, the larger conveyor available as an accessory increases the weight by
approx. 250 kg
The machine’s serial number, date of manufacture, weight, operating voltage (electric-powered machine)
and model are indicated on the grey type plate located on the machine frame below the locking latch of
the out-feed conveyor, on the right side of the operator.
1.4.
Operating conditions
The temperature range within which the machine can be operated is -20 to +30°C. In the winter,
the operator must ensure that there is no risk of slipping in the working area.
The working area must be level and clear of unnecessary items. No unauthorised persons are
allowed to enter the working area. The machine may only be used in sufficient lighting conditions.
