34 / 48
Hakki Pilke 43 Pro
Translation
Version 6-2018
5.2.
Changing the oil of the multiplier gear
1.
Remove the lifting arms’
pins B (2 pcs, Figure 28).
2.
Remove/loosen the bolts
circled in Figure 28 and
remove protective plates
A, C and D.
3.
Remove drain plug G
(Figure 29) and pour the
oil in a suitable container.
Note!
The
multiplier
gear’s oil volume is 0.34
litres.
4.
Close plug G and open
filler cap E (Figure 29).
5.
Feed the new oil to the
multiplier gear and close
filler cap E. The required
amount is 0.34 litres.
You can check the oil level
through oil level gauge F
(Figure 29).
6.
Put the protective plates
(A, C and D) and the lifting
arms’ pins (B) in Figure 28
back in place.
Figure 28.
Figure 29.