20 / 48
Hakki Pilke 43 Pro
Translation
Version 6-2018
NOTE! The maximum operating angle for the out-feed conveyor is 40°. The maximum angle is indicated
in the label below and the instructions attached to the out-feed conveyor.
3.2.5.
Splitting blade adjustment
The machine’s splitting blade is controlled hydraulically with control lever F (Figure 10). Pushing the lever
in the front position causes the blade to be lowered, while pulling the lever to the back position causes it
to rise. Logs should always be as centred as possible when passing the blade in order to keep the size of
the firewood consistent.
The blade can be lowered to the lowest position in one go by raising the blade to the upper position and
clearing the space under the blade. The machine must be shut down and disconnected from its power
source for the duration of the cleaning.
