Haiyang Stella Series Manual Download Page 37

Page: 37 / 136

- 37 -

12.1. WPT

WPT loads from the stored SD/MicroSD/USB.

All of WPT in the SD/MicroSD/USB show on the list. Choose one of them and it will show.

There are two ways to load WPT.

First, showing the stored WPT as well as the existing on the sceen. After loading the stored, you will

see the window and press [MENU].

Second, showing only stored WPT. After loading the stored, press [ENTER].

12.2. Route

Route loads from the stored SD/MicroSD/USB.

All of route in the SD/MicroSD/USB show on the list. Choose one of them and it will show.

12.3.Track

12.3.1. Type1

Track loads from the stored SD/MicroSD/USB.

All of track in the SD/MicroSD/USB show on the list. Choose one of them and it will show.

12.3.2. Type2

Summary of Contents for Stella Series









































































































































Search results

Summary of Contents for Stella Series

Reviews:

Related manuals for Stella Series

Brands by name

Popular brands

Haiyang Stella Series, Manual

Search results

Summary of Contents for Stella Series

Reviews:

Related manuals for Stella Series

Brands by name

Popular brands