Haiyang Stella Series, Manual

Page: 90 / 136

- 90 -
1.6.3. DSTC
This function can rejection the noise of surface.
(
☞ The default setting is
on.)
1.7. Scroll
This function allows the users to view the screen in the past fishfinder.
When the cursor is called You can see past the screen using the [
←
][
→
] key.
Then after [WPT] key is pressed, the input position is marked in the past.
(
★
Input position is incorrect error range according to the situation.)
(
★
Leghth of past fishfinder screen by scrolling depend on depth.)
1.8. Part Zoom
You can set the depth range when using the part zoom.
2. Advanced Menu
▶
[MENU] -> Advance
2.1. Display
2.1.1. A-scope
A-scope shows the research under the water by a scope to see the environment under the water.
(
☞
The default setting is OFF.)
2.1.2. Image Speed:
Select the speed of Fish finder image from 4X until 1/32X.
(
☞
The default setting is 1X.)
2.1.3. White Line
It is necessary to research a detailed fish on the bottom or a seaweed under the sea. The color of the
bottom changes into white or black to see the bottom easier than red.
(
☞ The default setting is OFF.)
2.1.4.Depth
Shown/Hidden the depth range on the screen.
(
☞ The default setting is
shown.)