Haiyang HIS-70R User Manual Download

Page: 8 / 58

- 8 -

HIS-70R System

GETTING STARTED

This getting Started section will help you become acquainted with the displays and the front panel

keyboard functions of your HIS-70R System. This section is intended to demonstrate the main

functions and basic operation of your HIS-70R System. More detailed procedures may be found in the

Operation section.

HIS-70R has built-in simulators which present realistic displays of cartography, GPS and Sounder.

Note: Sounder option is required is required to use the sounder simulator. Simulators are interactive so

the front panel keyboard can be used to browse through menus and change setting in the same

manner as actual operation. The internal simulators allow HIS-70R to operate without having

transducers or remote sensors connected. However, it is necessary to connect the power cable to 12

to 24 Vdc power source. Please refer to

Power Connection

in the installation section.

If HIS-70R is already installed on your vessel, simulators are still useful doe familiarity with displays
and practice with operating procedures.

Summary of Contents for HIS-70R



























































Search results

Summary of Contents for HIS-70R

Reviews:

Related manuals for HIS-70R

Brands by name

Popular brands

Haiyang HIS-70R, User Manual

Search results

Summary of Contents for HIS-70R

Reviews:

Related manuals for HIS-70R

Brands by name

Popular brands