- 38 -
Chartplotter menu
1.8-2. C-Map (*Only for *C-MAP mode.)
1.8-2. 1. SAT.Image
Setting up the overlay Satellite Image on the C-MAP.
(
☞
The default setting is shown.)
1.8-2. 2. Font&Symbols
On charts it is possible to set the size of all names and symbols drawn on the
charts, selecting between Normal size and Large size.
(
☞
The default setting is normal.)
1.8-2. 3. Mixing Level
When the map coverage at the current zoom level does not fill the entire screen, the chartplotter
draws the rest of the map expanding the cartographic information read from, at most, two zoom
levels above the current zoom level. For this reason the map is drawn three times; firstly it draws
the two levels before the current level and then the current level. The area covered by the
cartographic data read from the previous levels is identified by a dotted pattern. When the cursor
is moved area not covered by data of the currents level the chartplotter zooms out to the first
level covered by cartographic data. The default setting is ON.
☞
(
The default setting is on.)
1.8-2. 4. Perspective View
Chart data may be projected in perspective mode during navigation. This function allows setting
the panoramic View of the chart.
As the upper side of the map is more compressed than the lower side, a wider map area is
visible. The perspective view allows showing more chart information immediately ahead and
around the cursor.
☞
(
The default setting is off.)
1.8-2. 5. Chart Boundaries
Sets ON/OFF the displaying of the chart boundaries, which represents the boundaries of the
charts available on the chartplotter. Selecting Auto instead, if we are in background charts only
the first chart levels contained in the C-CARD are displayed, if we are in a charts level contained
in the C-CARD the next four charts level are displayed.
☞
(
The default setting is auto.)
1.8-2. 6. Multi Language
Select language for name of the place, lighthouse or buoy.
☞
(
The default setting is English.)
