Haiyang HD-1000C, Manual

Page: 66 / 136

- 66 -
2.9-1.8. Dynamic Current
Setting up the Dynamic Current on the HY-MAP.
(
☞ The default setting is
off.)
2.9-2. C-Map (*Only for *C-MAP mode.)
2. 9-2.1. SAT.Image
Setting up the overlay Satellite Image on the C-MAP.
(
☞ The default setting is shown.)
2.9-2.2. Font & Symbols
On charts it is possible to set the size of all names and symbols drawn on the charts, selecting
between Normal size and Large size.
(
☞ The default setting is normal.)
.
2.9-2.3. Mixing Level
When the map coverage at the current zoom level does not fill the entire screen, the chartplotter draws
the rest of the map expanding the cartographic information read from, at most, two zoom levels above
the current zoom level. For this reason the map is drawn three times; firstly it draws the two levels
before the current level and then the current level. The area covered by the cartographic data read
from the previous levels is identified by a dotted pattern. When the cursor is moved area not covered
by data of the currents level the chartplotter zooms out to the first level covered by cartographic data.
The default setting is ON.
(
☞ The default setting is on.)
2.9-2.4. Chart Boundaries
Sets ON/OFF the displaying of the chart boundaries, which represents the boundaries of the charts
available on the chartplotter. Selecting Auto instead, if we are in background charts only the first chart
levels contained in the C-CARD are displayed, if we are in a charts level contained in the C-CARD the
next four charts level are displayed.
(
☞ The default setting i
s auto.)
2.9-2.5. Multi Language
Select language for name of the place, lighthouse or buoy.