Haiyang HD-1000C, Manual

Page: 116 / 136

- 116 -
Display Unit Installation
Stella series brings expandable display technology to your bridge or navigation station. A careful
installation will assure maximum benefit from Stella series integrated features.
Display Unit Location
Select a location for your Stella series display unit that provides easy viewing from all likely operator’s
positions. The display unit is designed to be mounted on either a console or from an overhead surface.
The Stella series display is also designed for flush mounting using six threaded holes on the rear
panel. Locate the display in an area with protection from the elements and avoid direct sunlight on the
viewing window. Also, consider access to the rear panel of the unit for connecting power and cables to
the various remote sensors. The mounting surface must be flat and solid to support the unit and
prevent vibration. There should be access to the inside of the surface to permit through bolt fastening
for the mounting bracket.
Display Unit Installation
Temporarily install the mounting bracket on the Genesis display unit and place the unit at the selected
location.
CAUTION
The Stella series display unit is unstable when the mounting bracket is not secured. Hold the unit in
place at all times.
Check the suitability of the location and make any adjustments. When all is satisfactory, use the holes
in the mounting bracket as a guide and mark the holes locations on the mounting surface.
Drill a 1/4 in. diameter hole at each marked location. Mount the Stella series display bracket using
bolts through the mounting surface. Place large flat washers on the opposite side of the mounting
surface from the bracket and then install lock washers and nuts. Tighten securely.
Install the display unit into the mounting bracket. Check alignment and operation of the pivots and
security of the mounting. Make any adjustments necessary to prevent binding and assure even
meshing of the pivot locking washers. It is advised to remove the display unit and store it in a safe