Haiyang HD-1000C Manual Download Page 102

Page: 102 / 136

- 102 -

3. Maintenance

It is necessary to check the system or the version for maintenance and demonstrate Stella series with

the simulators

3.1. Program Version

It contains ID and the program version, and it has important information for maintenance and upgrade.

3.2. OS Version

It contains the version of OS, which is necessary for maintenance and upgrade

3.3. MAP Version

It contains the version of the chart, the datum and the number, which is necessary for maintenance

and upgrade

3.4. Simulator

It is necessary for an indoor demonstration. The simulations of GPS, Fish finder or AIS in the memory..

3.5. Language

Select the language.

3.6. Remote control settings

3.6.1. Remote control

You can set whether to use the remote control.

3.6.2. Remote control register

The remote control allows you to register your product.

3.6.3. Remote control unregister

This is used to unregister the remote control.

3.7. Initialization

3.7.1. User Initialization

The stored setting is initialized in the user setting.

3.7.1. Setup Initialization

reset without deleting user data.

3.7.2. Factory Initialization

returning to the initial system from the releasing of factory.

Summary of Contents for HD-1000C









































































































































Search results

Summary of Contents for HD-1000C

Reviews:

Related manuals for HD-1000C

Brands by name

Popular brands

Haiyang HD-1000C, Manual

Search results

Summary of Contents for HD-1000C

Reviews:

Related manuals for HD-1000C

Brands by name

Popular brands