Haiyang HD-1000C Manual Download Page 6

Page: 6 / 136

- 6 -

Stella Series System

Welcome

The Stella series opens a new chapter of performance and integration in vessel navigation system

display and management. Whether you are a Cruiser or Sport fisherman or both, 650 gives you the

information you need.

CAUTION

The Stella series employs the latest in proven technology to provide accurate navigation information.

The Plotter functions of Stella series are totally dependent upon the capability of the navigation source

to provide accurate position information. This device is only an aid to navigation. It should be used in

conjunction with all other navigation accuracy. For safety, always resolve any uncertainty before

continuing navigation.

There is no direct relationship between the color of water areas and their depth. The navigator shall

always query the area for depth information and use the official paper chart.

CAUTION

The performance of LCD displays is degraded by continuous direct exposure to ultraviolet rays. Locate

your Stella series Display away from direct sunlight. When not in use. Keep the display covered.

Summary of Contents for HD-1000C









































































































































Search results

Summary of Contents for HD-1000C

Reviews:

Related manuals for HD-1000C

Brands by name

Popular brands

Haiyang HD-1000C, Manual

Search results

Summary of Contents for HD-1000C

Reviews:

Related manuals for HD-1000C

Brands by name

Popular brands