Haiyang HD-1000C Manual Download Page 83

Page: 83 / 136

- 83 -

2. Choose the gain.

3. Twisting the rotary key to control the gain.

5. Controlling STC

1. Choose the frequency.

2. Choose the STC.

3. Twisting the rotary key to control the STC.

6. Mode

▶

[

MENU]->Mode

Three kinds in Fishfinder.

6.1. Normal

Normal mode (with Auto Range active) displays the sounder image with the surface at the top of the

screen and the sea bottom in the lower part of the screen. The depth scale indicates the depth range

appearing in the display. Bottom contours and fish echoes are displayed at the depths where they are

detected. If the depth Range is set manually to a value less than actual water depth, sea bottom

echoes are not displayed, but all other echoes within the Range setting are displayed.

Summary of Contents for HD-1000C









































































































































Search results

Summary of Contents for HD-1000C

Reviews:

Related manuals for HD-1000C

Brands by name

Popular brands

Haiyang HD-1000C, Manual

Search results

Summary of Contents for HD-1000C

Reviews:

Related manuals for HD-1000C

Brands by name

Popular brands