MANDO Adapt T812
Installation
Order h49 7144.907-333
41
2. Remove the changing parts from the basic clamping de-
vice [see operating instructions for the basic clamping
device].
If the adaptation clamping device needs to be installed on a
basic clamping device other than SPANNTOP mini, proceed
with installation of the clamping element [see »Installation of
the product« chapter].
If the adaptation clamping device is to be installed on a
SPANNTOP mini, an adaptation ring needs to be installed.
3. Install the adaptation ring [see the following description].
Installation of the adaptation ring
A
Adaption ring
A1 Adaption ring fixing screws
a
Test surface axial run-out adaptation ring
b
Test surface face run-out adaptation ring
