MANDO Adapt T812
Removal
76
Order h49 7144.907-333
WARNING
Serious injuries caused by the coupling ring being
ejected centrifugally after incorrect installation!
The coupling ring must never be installed without
the rotary extractor sleeve / the workpiece end-
stop.
If installation / removal work is interrupted, either
remove the coupling ring [rotary extractor sleeve
/ workpiece end-stop is not fully installed], or the
rotary extractor sleeve / the workpiece end-stop
must be fully installed before the interruption.
4. Remove the rotary extractor sleeve / the workpiece end-
stop [see »Removal of the changing parts« chapter]. To
do this, secure the coupling ring and the segmented
clamping bushing to prevent them from falling out.
5. Open the coupling ring and remove it.