MANDO Adapt T812
Installation
Order h49 7144.907-333
51
1. As described in the »Preparation of the machine for in-
stallation« chapter, prepare for the following steps.
INFORMATION
To install the clamping element, the rotary extractor
sleeve / the workpiece end-stop and the coupling ring
must be removed [see »Preparation of the product«
chapter].
2. Move the clamping device into release position.
3. Fit the segmented clamping bushing to the product and
secure it to prevent it from falling out. For this, the slots
in the segmented clamping bushing must engage in the
lugs in the coupling.
