MANDO Adapt T211
Faults
Order h49 7144.907-333
83
13.3 Unlocking the adaptation clamping device manually
If the adaptation clamping device cannot be taken off the
basic clamping device during removal, the following steps
are needed. For this, the product must be dismantled down
to the step »Taking down the adaptation clamping device«.
1. Remove the basic clamping device together with the in-
stalled adaptation clamping device [see operating in-
structions for the basic clamping device].
2. Press the locking pin in as far as possible.
3. Take the adaptation clamping device off the removed
basic clamping device.
4. Complete the removal of the adaptation clamping device
[see »Removal of the product« chapter].
5. Install the basic clamping device [see operating instruc-
tions for the basic clamping device]
6. Clean the adaptation clamping device [see »Cleaning«
chapter].
If the locking pin cannot be pressed in, enabling the adapta-
tion clamping device to be separated from the basic clamp-
ing device, the adaptation clamping device must then be dis-
mantled through the functional unit of the basic clamping de-
vice [see »Cleaning« chapter].
The basic clamping device can be reinstalled [see operating
instructions for the basic clamping device].
Clean the adaptation clamping device after disassembly and
reassemble the adaptation clamping device [without the
functional unit of the basic clamping device]. [see »Clean-
ing« chapter].
