MANDO Adapt T211
Removal
68
Order h49 7144.907-333
10.5.1 Removal of the adaptation clamping device
INFORMATION
To remove the product, the tension bolt must be re-
moved [see »Removal of the clamping element«
chapter].
1. Attach any lifting gear that may be required.
2. If necessary, fit the mounting aid onto a vertically sus-
pended spindle.
3. Move the basic clamping device into its release position.
4. Take the ejector ring off the product.
5. Unfasten and remove the fixing screws on the adapta-
tion clamping device.
