MANDO Adapt T211
Installation
40
Order h49 7144.907-333
7.6.1 Compatibility check
Check the compatibility of the product and the connection
point of the basic clamping device.
For this, check that the connection point and the product
share the same adaptation geometry. Also check if the actu-
ating element / coupling element is suitable.
7.6.2 Function check of the coupling range of the product
Check that the coupling range function on the product.
1. Tighten the tension bolt firmly home in the product.
2. Unfasten and remove the tension bolt. To do this, secure
the ejector ring to prevent it from falling out and pay at-
tention to the movement of the coupling slider.
3. Check the movement of all coupling sliders. When un-
screwing the tension bolt, all coupling sliders must move
inwards.
