EN 18
EN 19
ELECTRICAL HOOK-UP
Before connecting to the electricity, make
sure that:
• the characteristics of the electrical system
satisfy what is shown on the serial number
plate applied to the front of the oven;
• the system has an effective earth con-
nection compliant with current stand-
ards and laws.
The earth connection is required by law. The
cable must not, at any point, reach a temper-
ature greater than 50 °C above the ambient
temperature.
This oven must be connected to the electric-
ity through a power supply cable and plug that
is compatible with the outlet of the electrical
system that powers this oven.
If a fixed appliance does not have a power cord
and plug, or another device that ensures dis-
connection from the mains, with an opening
distance of the contacts that allows complete
disconnection under the conditions of exces-
sive voltage category III, such disconnection
devices must be provided in the power supply
mains conforming to the installation rules.
The omnipolar socket or switch must be easy
to reach when the appliance is installed.
NOTE: The manufacturer declines all liability if
the usual accident prevention standards and
the above instructions are not followed.
TYPE AND MINIMUM DIAMETER
OF THE CABLES
SASO
H05RR-F
3x1,5 mm²
H05RR-F
3x2,5 mm²
H05VV-F
3x1,5 mm²
H05VV-F
3x2,5 mm²
H05RN-F
3x1,5 mm²
H05RN-F
3x2,5 mm²
H05V2V2-F
3x1,5 mm²
H05V2V2-F
3x2,5 mm²
EN 18
EN 19
ELECTRICAL HOOK-UP
Before connecting to the electricity, make
sure that:
• the characteristics of the electrical system
satisfy what is shown on the serial number
plate applied to the front of the oven;
• the system has an effective earth con-
nection compliant with current stand-
ards and laws.
The earth connection is required by law. The
cable must not, at any point, reach a temper-
ature greater than 50 °C above the ambient
temperature.
This oven must be connected to the electric-
ity through a power supply cable and plug that
is compatible with the outlet of the electrical
system that powers this oven.
If a fixed appliance does not have a power cord
and plug, or another device that ensures dis-
connection from the mains, with an opening
distance of the contacts that allows complete
disconnection under the conditions of exces-
sive voltage category III, such disconnection
devices must be provided in the power supply
mains conforming to the installation rules.
The omnipolar socket or switch must be easy
to reach when the appliance is installed.
NOTE: The manufacturer declines all liability if
the usual accident prevention standards and
the above instructions are not followed.
TYPE AND MINIMUM DIAMETER
OF THE CABLES
SASO
H05RR-F
3x1,5 mm²
H05RR-F
3x2,5 mm²
H05VV-F
3x1,5 mm²
H05VV-F
3x2,5 mm²
H05RN-F
3x1,5 mm²
H05RN-F
3x2,5 mm²
H05V2V2-F
3x1,5 mm²
H05V2V2-F
3x2,5 mm²
