– 10 –
Dryer Features - Continued
Temp
The temperature of the dry cycle can be changed to the following:
High
For regular to heavy cottons.
Medium
For synthetics, blends and items labeled Permanent Press.
Low
For delicates, synthetics and items labeled Tumble Dry Low.
No Heat
This option may only be used with Air Fluff and Timed Dry, in which items are
tumbled without heat.
C
Level
The sensor continuously monitors the amount of moisture in the load. When the moisture in
the clothes reaches the selected dry level, the dryer will stop.
NOTE
: The Sensor Dry Level can be used with all cycles except: Timed Dry, Air Fluff, Rack
Dry, Warm Up and Dewrinkle.
Ex Dry
Use for heavy-duty fabrics or items that should be very dry, such as towels.
Dry
Use for normal dryness level suitable for most loads. This is the preferred
cycle for energy saving.
Damp
For leaving items partially damp.
D
Damp Alert
This option causes the dryer to beep when clothes have dried to a damp level. Remove any
items that should be hung to dry. The Damp Alert will only beep when this option is selected,
and the dryer will continue to dry.
Removing clothes and hanging them when they are damp can reduce the need to iron some
items.
E
Timed Dry
1. Select the drying time by pressing the
Timed Dry
button. Rotate the knob to increase or
decrease the time in 10 minute increments for up to 2 hours and 30 minutes.
2. Select the dry
Temp
(°C).
3. Close the door.
4. Press
Start
/
Pause
.
F
