2)
Specific Failure & Solution
Failure
Problem
Solution A
Solution B
The LED does not come on when
unit is plugged in.
No power supplied.
Check to see if plug is
secured tightly in outlet
and that outlet is
working.
The accessorial power
Check the connection.
board and the display
board connected failure.
The accessorial power
Replace the accessorial
board is damaged.
power board.
The display board is
Replace the display
damaged.
board.
Some buttons can’t work, or the
LED display is not normal.
The display board is
damaged.
Replace the display
board.
The Cooking Mode Indicator comes High temperature of the Ambient temperature
on, but heating does not start.
hob.
may be too high. Air
Intake or Air Vent may
be blocked.
There is something
Check whether the fan
wrong with the fan.
runs smoothly
；
if not , replace the fan.
The power board is
damaged.
Replace the power board.
Heating stops suddenly during
Pan Type is wrong.
Use the proper pot (refer Pan detection
circuit is
damaged,
replace the
power board.
operation and the display flashes
“
u
”.
to the instruction
manual.)
Pot diameter is too
small.
Cooker has overheated; Unit is overheated. Wait
for temperature to return
to normal.
Push “ON/OFF” button to
restart unit.
Heating zones of the same side (
Such as the first and the second
zone ) would display “
u
” .
The power board and
the display board
connected failure;
Check the connection.
The display board of
communicate part is
damaged.
Replace the display
board.
The Main board is
damaged.
Replace the power board.
Fan motor sounds
abnormal.
The fan motor is
damaged.
Replace the fan.
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and damages to the induction hob.
25
Summary of Contents for Candy HA2MTSJ68MC
Page 3: ......
