Hagie STS 10, Operator'S Manual

Page: 36 / 127

IV.
OPERATING SYSTEMS
4.13A
OPERATING SYSTEMS CONTINUED
RES-Q-ME TOOL/ EMERGENCY EXIT–
The RES-Q-ME tool (fig.
4.13A-1) located on the right rear cab frame, is used for an emergency exit.
The device, when firmly pressed against any glass in the cab, will automati-
cally trigger shattering the glass. Do not look directly at the glass as you use
the tool.
FIG. 4.13A-1
A
CAB GLASS–
The glass of the cab is DOT approved tempered glass.
The front windshield is rounded with a green UV reflective tint and the side
and back panels are flat with a UV reflective gray tint.
The design of the cab and the use of the glass allows a 210° view , tip to
tip of the booms from the operator’s seat.
FIG. 4.13A-2
REAR VIEWING MIRRORS–
The cab also has two external rear
viewing mirrors (fig. 4.13A-3).
FIG. 4.13A-3
CAB FILTERS–
Inside the cab are two filters (fig. 4.13A-4), a charcoal
filter and a paper filter. Refer to the SERVICE section B on filters for mainte-
nance information. Refer to the Hagie STS 10 Part Manual for replacement
part information.
A. CAB
FIG. 4.13A-4
B