5-5
SECTION 5 –
MISCELLANEOUS
QUICK-TACH SYSTEM
Connecting the NTB
1. Square up to the NTB attachment.
2. Disengage the Quick-Tach Lock Assem-
blies by pulling the Lock Pin (located on
the front left and right-hand side of
machine) OUT as far as it will go until it
is in the “lock-out” position.
NOTE: “Lock-out” position prevents re-
locking while attaching or detaching
the NTB.
3. Lower the machine by rotating the corre-
sponding Air Suspension Valves (located
on the left-hand front and rear air bags)
in the COUNTER-CLOCKWISE
(Deflate) position.
4. Slowly pull machine into NTB attach-
ment, ensuring the Attachment Hooks
are high enough to clear the mounting
pins.
WARNING
When connecting or disconnecting the
attachment, observe the following safety
precautions:
• Monitor both sides of the attachment
during fold procedure.
• Select a safe area that is solid and level
before unfolding/folding the attachment.
• Clear area of personnel.
• Check for overhead obstructions.
• Do not unfold or fold attachment near
power lines. Contact with power lines can
result in serious injury or death.
WARNING
Turn the engine OFF before connecting/
disconnecting any hoses or electrical
lines. Failure to comply may result in
serious injury or death.
Lock Pin
(Located on the front left and
right-hand side of machine)
-Typical View
* Disengaged position shown
Air Suspension Valves
(Located on the left-hand
front and rear air bags)
-Typical View
* Front left-hand air bag shown
• Left-
Hand
• Right-
Hand
Summary of Contents for 60' HsTB 24-Row
Page 47: ......
