3-6
SECTION 3 –
OPERATING YOUR NTB
FLOAT OPERATION
Float operation allows the NTB to raise up
and down while riding through the field to
avoid machine damage due to uneven
ground.
Float operation may be activated using
various methods. In all options, Float must be
enabled through the Machine Display and the
machine must be in Field Mode.
Master Spray Switch
(Default Setting)
The Master Spray Switch (located on the
Hydrostatic Drive Control Handle) controls
both the solution valves and the Float
“Down” functions when Float is enabled.
1. Press the Field/Road Button (located on
the Machine Display Home Page) and
change the machine’s drive state to
FIELD mode.
NOTE: The selected drive state will
illuminate.
NOTE: The machine’s drive state cannot be
changed unless the Hydrostatic Drive
Control Handle is in the NEUTRAL
position.
2. Press the Float Button (located on the
Machine Display Auxiliary Controls
Page) to enable Float operation.
3. Float will now be activated when the
Master Spray Switch is pressed.
NOTICE
Ensure Float operation is enabled when
operating the NTB. Failure to comply
may result in property damage.
Field/Road Button
(Located on the Machine Display
Home Page)
Float Button
(Located on the Machine Display
Auxiliary Controls Page)
Summary of Contents for 60' HsTB 24-Row
Page 47: ......
