SECTION 3 –
OPERATING YOUR NTB
3-7
Set Float to Transom Switch
The Set Float to Transom Switch feature
allows the operator to activate Float with the
Transom “Down” Switch (located on the
Hydrostatic Drive Control Handle).
1. Press and hold the Transom Switch
(located on the Hydrostatic Drive Con-
trol Handle) in the UP position to raise
the NTB to desired height.
2. Press the NTB Setup Button (located on
the Machine Display Settings Page).
Master Spray Switch
(Located on the back side of the Hydrostatic
Drive Control Handle - Version 1)
-Typical View
Master Spray Switch
(Located on the Hydrostatic Drive
Control Handle - Version 2)
-Typical View
Transom Switch - UP
(Located on the Hydrostatic
Drive Control Handle - Version 1)
-Typical View
Transom Switch - UP
(Located on the Hydrostatic Drive
Control Handle - Version 2)
-Typical View
Summary of Contents for 60' HsTB 24-Row
Page 47: ......
