univers FW internal fitting system
Kits to assemble
84
Technical changes reserved
Mounting plate attached to the back of the vertical uprights (top of picture)
and to the front of the vertical uprights (bottom of picture)
If the mounting plate is installed in the head/foot section area (area at < 113 mm
from the top/bottom corner of the support frame), the mounting plate must be
turned 180° to click the support frame into place.
Mounting the plastic plate < 113 mm above the top corner of the support frame: the
mounting plate must be turned 180°
Standard univers tapping screws 4.2 x 9.5 mm (e.g.
UZ100
) can also be screwed
into the mounting plate provided that the specified torque is not exceeded
(1.2 Nm).
Summary of Contents for univers FW
