hager univers FW, Manual

Page: 67 / 136

Mounting the body/wall cabinet
Before wall installation
Technical changes reserved 65
Dimensions for two connected enclosures (FWUwx.. + FWUyz.. + FWU00F1)
Meaning of the placeholders:
w Height code of the first FWU enclosure
y Height code of the second (connected) FWU enclosure
x Width code of the first FWU enclosure
z Width code of the second (connected) FWU enclosure
Total height H2
[mm] Total width L2
[mm]
FWU first
enclosure
FWU second enclosure
Height code y
FWU first
enclosure
FWU second
enclosure
Width code z
Height
code
w
H1
[mm] 3 4 5 6 7 8
Width code
x L1
[mm] 1 2 3
3 502 1057 1207 1357 1507 1657 1807 1 310 662 912 1162
4 652 1207 1357 1507 1657 1807 2 560 912 1162 1412
5 802 1357 1507 1657 1807 3 810 1162 1412 1662
6 952 1507 1657 1807
7 1102 1657 1807
8 1252 1807
Example:
One FWU42K1 and one FWU41S enclosure are to be mounted side by side using
the FWU00F1 connector.
-
The width code of enclosure FWU4 2 K1 is x = 2.
-
The width code of enclosure FWU4 1 S is z = 1.
=> This means a required total width L2 of 912 mm for the wall cut-out.