hager univers FW Manual Download

Page: 15 / 136

Technical data

Requirements for authorised personnel

Technical changes reserved

Protection class

Protection class II (double insulated)

Symbol for protection class II

Note:

When using multimedia kits (without covers), all devices and wiring must be
equipped with protective insulation or double insulation. Only the distribution
kit is equipped with double insulation ex-works.

Protection classes

IP30 with door (plain, slotted, transparent or multimedia)

IP30 without a door but with covered internal fitting kits. Only the distribution
kit is IP30-protected without a door.

Note:

Observe the operating equipment protection type.

Impact protection

IK09 all round for an enclosure with plain door, except for the flange
(excluded in the standard)

IK07 for an enclosure with slotted, transparent or multimedia door

IK05 for an enclosure equipped with an internal fitting system but without
door

Colour

Door, frame, covers and interior insulation: RAL 9010 (pure white)

Metal plate wall cabinet and metal parts of internal fitting system: grey and
hot-dip galvanised

univers Z mounting towers: black

Materials

Door and frame:

Steel, 1 mm thick

Powder-coated with epoxy polyester paint then baked

Metal plate wall cabinet made of hot-dip galvanised steel, 1 mm thick

Material for insulated parts:

Polystyrene (PS): Covers, head/foot sections, rear panel, extrusion profile

Polycarbonate/acrylonitrile styrene acrylate (PC/ASA): Corner sections,
multimedia panel

Polycarbonate (PC): Multimedia door inserts

Material for univers FW support towers:

Polyamide 6 (PA6): Underparts, double towers

Polycarbonate (PC): Overparts

Vertical uprights and DIN rails made of hot-dip galvanised steel, 1 mm thick

Multimedia steel supports (patch panels) made of hot-dip galvanised steel,
1.5 mm thick

Multimedia perforated plates made of hot-dip galvanised steel, 1 mm thick

Summary of Contents for univers FW









































































































































Search results

Summary of Contents for univers FW

Reviews:

Related manuals for univers FW

Brands by name

Popular brands

hager univers FW, Manual

Search results

Summary of Contents for univers FW

Reviews:

Related manuals for univers FW

Brands by name

Popular brands