hager univers FW, Manual

Page: 66 / 136

Mounting the body/wall cabinet
Before wall installation
64 Technical changes reserved
Vertical enclosure-to-enclosure connection
The FWU00F1 connection set enables two wall cabinets to be mechanically
connected at the elongated holes at the top and bottom with the aid of two
U-profiles. One pair of holes is arranged above another pair on the brackets. The
2 brackets for vertical connection are 53 mm wide.
Attaching two wall cabinets above one another (vertically)
The assembly procedure is described in detail in mounting instruction sheet
6LE006998.
Dimensions of wall cut-out for connected enclosures
The dimensions for the wall cut-out (niche) for enclosures connected by means of
connection set FWU00F1 are determined using the following drawings and
tables.
-
Dimensions L1 and H2 apply to enclosures connected one above the other
(vertically).
-
Dimensions L2 and H1 apply to enclosures connected beside each other
(horizontally).