1
RPi4 CASE, WITH HEATSINK KIT
Assembly Instructions
MP004561 and MP004562
IMPORTANT SAFETY INFORMATION
When using electronic components basic safety precautions should always be
followed.
KIT CONTENTS
WARNING:
This is an electrostatic sensitive device, take precautions to
ground yourself during the assembly procedure.
ASSEMBLY
1. Take carrier plate (g) & attach stand-offs
(c&d) with screws (b).
Attach both heat block (j&l) to carrier plate
(g) with screws (n) as shown.
Peel backing paper from adhesive pads
(k&m) & stick to each heat block (j&l).
Now remove remaining backing paper.
(a) x8 M3x10 Taptite Screws
(b) x14 M2.5x5 Screws
(c) x4 12mm Stand-offs
(d) x3 8mm Stand-offs
(e) x1 Aluminium End Plate
(f) x1 HDMI Extender PCB
(g) x1 Aluminium Carrier Plate
(h) x1 Aluminium Extrusion
(I) x1 Acrylic End Plate
(j) x1 Small Heat Block
(k) x1 Small Heat Pad
(l) x1 Large Heat Block
(m) x1 Large Heat Pad
(n) x2 M3x5 Screws
