15
OPERATION
Cancel settings
Change the timer beeps
•
Set the oven function knob and the
temperature regulator knob to the
switched●off position.
•
●Press sensor
MENU
, < or > in order to
switch off the alarm; the function AUTO
will go out and the display will show the
current time.
•
●press sensors < and > simultaneously,
•
press sensor MENU to select timer set-
ings,
•
●press sensors < and > again,
•
press sensors < and > simultaneously,
select “tone” function with the 1 sen-
sor,
•
the display panel will start to blink:
•
with the > sensor press the appropri-
ate sensors from 1 to 3 to select the
option you wish.
when the difference between the set oper-
ation end time and the operation duration
time occurs (e.g. the operation time is set to
1 hour, the operation end time is set to
14.00, so the oven will start working auto-
matically at 13.00).
The function AUTO is now on; the oven will
start operating from the point when the dif-
ference between the set operation end time
and the operation duration time occurs (e.g.
the operation time is set to 1 hour, the op-
eration end time is set to 14.00, so the oven
will start working automatically at 13.00).
When the oven reaches the operation end
time it will switch off automatically, the alarm
will be activated and the function AUTO will
start flashing again.
Timer and automatic function settings may
be cancelled at any time.
Cancel automatic function settings:
Cancel timer settings:
The tone of the timer beeps may be
changed as follows:
