12
OPERATION
Before using the oven for the first
time
•
●Remove packaging, clean the interior
of the oven and the hob.
•
●Take out and wash the oven fittings
with warm water and a little washing●up
liquid.
•
●Switch on the ventillation in the room or
open a window.
•
●Heat the oven (to a temperature of
250
o●
C, for approx. 30 min.), remove
any stains and wash carefully; the heat-
ing zones of the hob should be heated
for around 4 min. without a pan.
Important!
Important!
In ovens equipped with the electronic
programmer Tb, the time “0.00” will
start flashing in the display field upon
connection to the power supply.
The programmer should be set
with the current time. (See Elec-
tronic programmer ). If the current
time is not set operation of the
oven is impossible.
To clean the oven, only use a cloth
well rang out with warm water to
which a little washing-up liquid has
been added.
The electronic prgrammer Tb is
equipped with electronic sensors
which are switched on by touching
or pressing the sensor surface for at
least one second.
Each sensor reaction is confirmed by
the beep.Keep the sensor surface
clean at all times.
