manualshive.com logo in svg

Hach TU5200, User Manual, Page: 34 / 40

Share
Download
Hach TU5200 User Manual Download Page 34

Message

Solution

Instrument update

Copy from USB Memory
failed

Remove large files from the USB flash drive that use too much space. Start the
instrument update procedure again.
Remove the instrument update files from the USB flash drive. Save the instrument
update files again to the USB flash drive.
Connect the USB flash drive to the instrument. Start the instrument update
procedure again.

Instrument update file is
missing

Remove the instrument update files from the USB flash drive. Save the instrument
update files again to the USB flash drive.
Connect the USB flash drive to the instrument. Start the instrument update
procedure again.

Instrument update file is
corrupt

Update script file is corrupt

Not enough memory to
update the instrument

Contact technical support.

USB memory is not
connected.

Connect a USB flash drive to the instrument. Make sure that the file system
"FAT32" is installed on the USB flash drive.
Set the power to off, wait 20 seconds and then set the power to on again. Connect
the USB flash drive. Start the instrument update procedure again.

Read/Write to USB flash drive

Cannot write to USB
memory

Connect a USB flash drive to the instrument. Make sure that the file system
"FAT32" is installed on the USB flash drive.
Set the power to off, wait 20 seconds and then set the power to on again. Look for
remaining space on the USB flash drive.
Set the power to off, wait 20 seconds and then set the power to on again. Connect
the USB flash drive to the instrument.

Cannot read from USB
memory

Restore backup

No instrument backup is
available.

Connect a USB flash drive to the instrument. Make sure that the file system
"FAT32" is installed on the USB flash drive.
Set the power to off, wait 20 seconds and then set the power to on again. Connect
the USB flash drive. Start the instrument update procedure again.

Not able to restore the
backup

Security

Invalid password

Enter the correct password. If the password is lost, contact technical support.

Send data

Connect a receiving device.

Examine the device connections. Set the Auto Send setting to off. Refer to 

Configure the measurement settings

 on page 15.

Add sample IDs from list

No valid data found

No sample ID file was found on the USB flash drive.

Not able to read sampling
date.

Make sure that the date and time format is dd.mm.yyyy hh:mm.

The instrument cannot read
the Sample ID

Examine the text strings. Refer to 

Import sample IDs (optional)

 on page 14.

Problem/Error: Incorrect
date
Possible cause: The wrong
date format.

Make sure that the date and time format is dd.mm.yyyy hh:mm.

32

   

English

Summary of Contents for TU5200









































Reviews:

No comments