Hach Portable Spectrophotometer DR 2800 User Manual Download Page 98

Page: 98 / 126

Advanced Operations

6.7.1 Instrument information

Press

Instrument Information

in the System Checks menu.

The model, serial number and software version are displayed.

6.7.2 Upgrade of the instrument software

To obtain the software for the update from the Internet at

www.hach.com:

Go to

http://www.hach.com

On the DR 2800 product page, click

Lab System

Software

Software Update Downloads

under

Downloads

Locate the appropriate download and follow the prompts for
saving the file(s) to the USB memory stick.

On the DR 2800, press

Instrument Update

in the System

Checks menu.

Connect the USB stick to the USB interface on the DR 2800
(

section 3.4 on page 13

). Press

.The link is established

automatically and the software is updated.

Press

to return to the System Checks menu.

Note:

When the instrument software has been updated, a prompt to restart

the instrument is displayed.

Summary of Contents for Portable Spectrophotometer DR 2800






























































































































Search results

Summary of Contents for Portable Spectrophotometer DR 2800

Reviews:

Brands by name

Popular brands

Hach Portable Spectrophotometer DR 2800, User Manual

Search results

Summary of Contents for Portable Spectrophotometer DR 2800

Reviews:

Brands by name

Popular brands