52
Maintenance
6.3 Replacing wiper profiles (only plus version)
The life of the wiper profiles is, on the one hand, dependent on the number of
cleaning actions performed, and is also dependent on the type of deposits to be
removed. Thus the life of the wiper profiles varies from case to case.
The wiper profiles supplied with the instrument are sufficient to the cover
requirements for an average year..
Select
Menu level
Accept
1.
MAIN MENU
2.
SENSOR-SETUP
3.
SELECT SENSOR
(if there is more than one sensor)
4.
TEST/MAINT
5.
MAINT.PROC.
6.
REPLACE WIPER
7.
OUTPUT MODE information
8.
TURN OFF SAMPLE INLET
9.
DRAIN MEAS.CHAMBER
(via the lower feed union)
10.
OPEN MEAS.CHAMBER
11.
REMOVE WIPER HOLDER
12.
CLEAN MEAS.CHAMBER
13.
REPLACE PROFILE
14.
REPLACE WIPER HOLDER
15.
CLOSE MEAS.CHAMBER
16.
OPEN SAMPLE INLET
(Automatic wiping action after conformation
and profile counter reset)
客服：400 688 9809
