Hach DR 5000 User Manual Download Page 96

Page: 96 / 136

Advanced Operations

According to the selected wavelength range, select the interval
from the actively displayed wavelength steps. In summery
maximally 780 measuring steps can be accomplished during a
Scan.

Note:

The maximum wavelength adjusts automatically if the difference

between the maximum and minimum wavelength is not a multiple of
the interval.

Press

to return to the scan mode. Selected parameters are

displayed along the graph‘s x-axis.

Select view (displaying table)

Press

Select View

in the Options menu after a reading is

taken.

A table with the results is displayed.

To return to the graph press

Options

and then

View Graph

Cursor mode

Press

Cursor Mode: Track

in the Options menu.

The selection for this menu item determines what data are
displayed in the table. Highlight

Track

Peak/Valley.

Press

to confirm.

Press

Return

to return to the scan mode.

Integral

The Integral applies to the whole wavelength range of the scan.

Press

Integral: Off

in the Options menu.

Highlight

to show the Integral. To find the integral of other

wavelength ranges, change the wavelength range and scan
again.

Press

to confirm.

Summary of Contents for DR 5000








































































































































Search results

Summary of Contents for DR 5000

Reviews:

Brands by name

Popular brands

Hach DR 5000, User Manual

Search results

Summary of Contents for DR 5000

Reviews:

Brands by name

Popular brands