Hach DR 5000 User Manual Download Page 27

Page: 27 / 136

Standard Operations

Select the length of time the lamp will be switched on.

Note:

After this period of time the lamp automatically turns off, after no

measurement has been made outside the corresponding range (UV/VIS).

Touch

to confirm.

Touch

UV Switch

key to select the wavelength value between

320 nm and 360 nm, at which the instrument changes from the
visible to UV source.

Use the alphanumeric keypad to enter the maximum
wavelength for UV operation.

Touch

to confirm and return to “Lamp Control“.

10.

Touch

to confirm and return to “Instrument Setup“.

Note:

The selected program that requires a lamp has highest priority. If the

lamp in the

Lamp Control

was turned off, the lamp will be turned on

automatically if it is needed for the stored program.

5.2.5.2 Effect caused by the lamp settings on the Measuring Mode

UV-Lamp switches on manually. The icon ”UV Lamp“ appears in the
display and flashes.

The instrument will display ”Lamp Warmup...“. This takes about
3 minutes.

Summary of Contents for DR 5000








































































































































Search results

Summary of Contents for DR 5000

Reviews:

Brands by name

Popular brands

Hach DR 5000, User Manual

Search results

Summary of Contents for DR 5000

Reviews:

Brands by name

Popular brands