- 13 -
BALBOA GS523DZ
Electronic control system 380V input power wiring connection diagram
Notice
：
1
、
If your spa uses BALBOA GS523DZ electronic control system, 230 V input power is confirmed
with the supplier, please do not connect with 380V input power and 380V input power wiring connection
diagram is not available while installation, and vice-versa.Attention, we are not responsible for any loss in
any fault in Buyer’s operation.
2
、
If necessary to change, please consult with your dealer and changed by professionals.
Ⅵ
. Care and Maintenance:
1).Please clean the massage bathtub with neutral detergent and soft fabric. Do not clean it with acetone,
solution, ammonia water and organic solvent, otherwise, it may possibly damage the surface of the bathtub.
Mildly wipe off the adhesive stains on the bathtub with soft fabric and gasoline.
2).If there’s scratches on the bathtub, please grind with 2000# grinding paper with water, and then polish
with toothpaste and soft fabric.
3). Please wipe off the water scale on the bathtub with light acid detergent such as citric acid and vinegar.
4). Remove the water-return unit and nozzle for cleaning and removing dirt.
5). Do not frequently wipe the gold and chrome plated parts (do not contact it with organic solvent).
6). please keep blunt and knife away from the surface, and butt or the things over 60 degree should be away
from that too.
7).one time to check button of electricity leakage every month.
8).
Make frequent checks on the electrical wires, buttons, connectors always to see if they are bitten by rats
or worms.
9). Make frequent checks on the feed pipe and drain pipe always to see if there is some parts broken or
bended make sure it is smooth.
10).when storing the products, do not put converted and overlapped, make sure they are far away from
formic acid and methanal as well as any other organic solvent.
11).if they are needed to be carried, do take those actions lightly, in case of high pressure
、
mechanical
impact strength and succession.
12).if the bathtub are not to be used for a long time, dry inside the bathtub and make the circumstance dry
and ventilated as well as no corrosive gas.
Ⅶ
. Instructions on Maintenance:
1). Replace the massage water pump: cut off power supply, open the bathtub side plate, drain empty the
SPA’s water, remove the wires and open the water pump, loosen the fixed bolts and take out the water
