Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Regulating Unit PMR-06
Fax. ++39(0)438.200545
Author:
S.D.T. / KM
INSTALLATION
Editon: 12/2005
Page
C-2
Replaces: 05/2005
C.1
PREPARATION OF WORKING AREA
ATTENTION
The regulating unit must be placed on a floor or support of suitable size that is able to
take the weight and bulk of the equipment.
The machinery must be placed in a room with sufficient lighting, avoiding dazzling and
stroboscopic effects. Personnel entrusted to control the regulating unit must be able to
work under normal light conditions (usually provided by neon lights fitted on the ceiling).
If the lighting is not adequate, the customer must provide additional lighting. Since the
equipment's panel has back lighting but does not have its own lighting system in the
(rear) non-operational areas.
The work area must be well ventilated and have an air cycling and emission system
compliant with the law of the country of installation, such as to ensure the operator is
working under the proper working conditions.
The free space around the regulating unit must be sufficient for work and maintenance
operations and permit access to the panel according to its position.
The customer must provide the required electrical power as indicated in
.
Ensure that there is a properly stocked first aid box on site nearby.
ATTENTION
The main switch of the electrical panel must be in its “OFF” position when the regulating
unit is being connected up.
Regulating Unit PMR-06
