Habasit PMR-06 General Manual Use And Maintenance Download Page 41

Page: 41 / 117

Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113

Regulating Unit PMR-06

Fax. ++39(0)438.200545

Author:

S.D.T. / KM

OPERATION

Editon: 12/2005

Page

D-2

Replaces: 05/2005

D.1

GENERAL WARNINGS

The operator and/or maintenance technician must use the equipment in the manner

described in this manual and must avoid creating situations that could cause danger to

persons who may come into contact with the equipment or things connected to it.

IMPORTANT

THE INFORMATION DEVICES (SIGNS) AND SAFETY NOTICES MUST BE KEPT CLEAN AND

LEGIBLE.

ATTENTION

DO NOT IN ANY WAY ALTER THE EQUIPMENT'S SAFETY SYSTEM.

ATTENTION

IT IS ABSOLUTELY FORBIDDEN TO REMOVE THE PROTECTIVE DEVICES INSTALLED ON THE

REGULATING UNIT.

ATTENTION

CARRYING OUT CLEANING AND MAINTENANCE JOBS WHILE THE SYSTEMS ARE LIVE IS

ABSOLUTELY FORBIDDEN.

ATTENTION

DO NOT REMOVE THE GUARDS WHICH REQUIRE TOOLS FOR THEIR REMOVAL.

Regulating Unit PMR-06

Summary of Contents for PMR-06






















































































































Search results

Summary of Contents for PMR-06

Reviews:

Related manuals for PMR-06

Brands by name

Popular brands

Habasit PMR-06, General Manual Use And Maintenance

Search results

Summary of Contents for PMR-06

Reviews:

Related manuals for PMR-06

Brands by name

Popular brands