Habasit PMR-06 General Manual Use And Maintenance Download Page 108

Page: 108 / 117

Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113

Regulating Unit PMR-06

Fax. ++39(0)438.200545

Author:

S.D.T. / KM

PMC-06

Edition: 12/2005

Page

H-1

Replaces: 05/2005

H. PMC-06

H.1

PURPOSE OF THE DEVICE

The PMC-06 cooling unit works only in combination with the PMR-06 regulation unit and
enables the flow of cooling air and liquid (water) to the hot pressing device to be
controlled.

The cooling unit PMC-06 has been developed exclusively for the applications described
herein. No other or inappropriate applications are permitted.

ATTENTION

ANY USE OF THE REGULATING UNIT OTHER THAN FOR WHICH IT WAS DESIGNED MAY BE

IMPROPER USE AND RESULT IN NOT BEING SAFE FROM THE POINTS OF VIEW OF THE

OPERATOR, MAINTENANCE WORKER AND OF THE REGULATING UNIT ITSELF.

HABASIT SHALL NOT BE HELD LIABLE FOR THE CONSEQUENCES OF ANY BREACHES OF

THESE RULES.

Regulating Unit PMR-06

Summary of Contents for PMR-06






















































































































Search results

Summary of Contents for PMR-06

Reviews:

Related manuals for PMR-06

Brands by name

Popular brands

Habasit PMR-06, General Manual Use And Maintenance

Search results

Summary of Contents for PMR-06

Reviews:

Related manuals for PMR-06

Brands by name

Popular brands