Rotates 360˚
Care & Maintenance
Always be sure that your floor
sanitizer is UNPLUGGED from
the wall receptacle prior to
cleaning or before emptying
the water tank.
1) Turn your Floor Sanitizer off and unplug the unit
from the electrical outlet.
2) Place the unit on the Floor Protector/Resting Mat.
3) Prepare to store the Floor Sanitizer by looping the
power cord around the pivoting cord wraps found
on the handle pole and snap the plug securely
onto the cord when complete. (Fig 22)
4) Let your Floor Sanitizer cool for five (5) minutes
before removing the Ultra-Microfiber Pad.
5) Always empty the water tank once you have
finished using your Floor Sanitizer and before
you store the unit.
6) Remove the Ultra-Microfiber Pad and wash in
warm water with a mild detergent. Never use
bleach or fabric softener when cleaning the
Ultra-Microfiber Pad. The pad can be washed in
a washing machine set on the gentle cycle. We
recommend that you air dry the pads for 24
hours, but they can also be dried in a clothes
dryer on a low heat setting.
7) To clean the body of your Floor Sanitizer wipe it
down with a damp cloth.
8) You may wish to lower the Telescoping Pole to its
lowest level before storing the FS-20.
9) Store the unit upright in a protected dry area,
standing it on the Floor Protector/Resting Mat,
or by hanging it by the Storage Hook.
(Fig 23a & b))
Any other maintenance or service not included
in this manual should be performed by an
authorized service representative.
For questions call the Customer Care Center:
1-877-
Haan
DIRECT (1-877-422-6347)
iMPortant
!
i
CaUtion
!
i
Do not immerse your Floor
Sanitizer in water or any
other liquid.
HELPFUL
Haan
®
HINT:
DO NOT
use fabric softener
when washing the Ultra-
Microfiber Pads as this will
compromise the absorbency
of the microfiber.
Fig 22
Fig 23
www.
HAAN
USA.com 877-HAAN DIRECT / 877-422-6347
pg 15
b
a
