Troubleshooting
(cont)
PRoBLeM: Water is leaking from the Floor sanitizer.
Possible Cause:
1) Your unit’s water tank is overfilled.
Possible Solution:
1) The fill line on the Fill Cup indicates the proper
amount of water needed for the tank, but you may
want to try putting a little less water in the tank.
NOTE:
Water should not go above the “bar” inside the
opening on top of the tank.
PRoBLeM: Floor sanitizer leaves water on the floor.
Possible Cause:
1) Ultra-Microfiber Pad is saturated.
2) Unit is not level on the floor.
Possible Solution:
1) Turn off unit, unplug from power outlet and change
the Ultra-Microfiber Pad as described on pg 10.
2) Always keep the Floor Sanitizer level and parallel
to the floor.
PRoBLeM: Floor sanitizer left white spot on the floor.
Possible Cause:
1) The Floor Sanitizer left in one spot for too long.
2) The Floor Sanitizer was not placed on the Floor
Protector/Resting Mat.
3) Hard water was used in the Floor Sanitizer.
Possible Solution:
1) Always place your Floor Sanitizer on the Floor
Protector/Resting Mat whenever not actively using
it.
Never
leave the FS-20 in one spot on any surface
for any period of time.
2) Use distilled water in the Floor Sanitizer.
NOTE:
To remove spot, use a damp, dry cloth
with a few drops of white vinegar and rub the
stain to remove spot.
www.
HAAN
USA.com 877-HAAN DIRECT / 877-422-6347
pg 23