pg 20 877-HAAN DIRECT / 877-422-6347
www.
HAAN
USA.com
QUestioN: i don’t see much steam coming out of the
Haan
®
Fs-20 steam Cleaning Floor sanitizer – why not?
Actually, you shouldn’t be able to see that much steam coming
out of the FS-20. The truth is, the more steam you see when in
use, the less effective a floor sanitizer is, because the steam
should be physically directed to cleaning your floors (or
other horizontal hard surfaces), and not escaping through
other parts of the steamer.
QUestioN: the
Haan
®
Floor sanitizer is leaving my floor
wet. Why and what can i do about it?
The Ultra-Microfiber Pad may need to be changed. For
optimal performance, the pad should be changed after 10
minutes of use.
QUestioN: How long can you use an Ultra-microfiber
Pad before it needs to be changed?
The pad should be changed approximately every 10 minutes,
or when it becomes saturated with water. The machine will
become harder to push smoothly on the floor when the pad
is saturated.
QUestioN: How long does a tank of water last? how
often do i need to refill the tank?
A full tank will last approximately 20 minutes.
QUestioN: sometimes my floor sanitizer becomes hard
to push – why?
If the unit is hard to push it is likely because the Ultra-
Microfiber Pad is too wet or the angle at which you are
using the machine is too high. The lower the handle, the
easier the floor sanitizer is to push across the floor and if
doing this does not help try replacing the Pad with a dry one.
QUestioN: Will the
Haan
®
floor sanitizer clean grout?
Yes, but it needs a little help. If you glide your
Haan
®
over
the problem grout areas and then scrub with your Ultra-
Microfiber Pad, it should effectively clean surface dirt in
your grout.
?
?
?
?
?
Questions About the Floor Sanitizer
?
