4
LED
Status
Description
Steady yellow
The device is initializing or an initialization exception
has occurred.
Flashing green (once per
second)
The AP has started up but has not registered to any
AC.
Flashing green (twice per
second)
The AP is upgrading the image.
Alternating between
yellow and green (once
per second)
The AP has connected to the Cloudnet platform and
has associated clients.
Radio status LED
Off
The radios do not have associated clients, or the
LED has been disabled from the CLI.
Flashing yellow (once per
second)
A radio has been enabled but does not have
associated clients.
Flashing green (once per
second)
A radio has associated clients.
Uplink port status LED
Off
No link is present on the port.
Steady yellow
The port has been auto-negotiated to operate at
10/100 Mbps.
Flashing yellow
The port is sending or receiving data at 10/100
Mbps.
Steady green
The port has been auto-negotiated to operate at
1000 Mbps.
Flashing green
The port is sending or receiving data at 1000 Mbps.
Ethernet copper port
LED
Off
No link is present on the port.
Steady yellow
The port has been auto-negotiated to operate at
10/100 Mbps.
Flashing yellow
The port is sending or receiving data at 10/100
Mbps.
Steady green
The port has been auto-negotiated to operate at
1000 Mbps.
Flashing green
The port is sending or receiving data at 1000 Mbps.
Table 4 RESET button descriptions
Press and hold
duration (sec)
Button LED status
Description
0 to 5
Steady green
Reset the AP.
5 to 20
Flashing green (twice per second)
Restore to the factory defaults.
20 to 30
Yellow
Flashing (once per
two seconds)
The AP is operating in fit mode.
Flashing (four times
per second)
The AP is operating in cloud mode.
> 30
Yellow
Flashing (twice per
second)
The AP is operating in cloud mode.
Green
Flashing (twice
times per second)
Change the AP operating mode to cloud.
NOTE:
