2
Booting Normal Extend BootWare.
...
System application is starting...
Startup configuration file does not exist.
User interface con0 is available.
Press ENTER to get started.
Logging in to the AP through Telnet
By default, Telnet is enabled and the following login information is defined for your login:
•
Username
—admin.
•
Password
—h3capadmin.
Make sure the PC obtains an IP address dynamically.
When the AP operates in cloud mode, it obtains the IP address of VLAN 1 dynamically by default.
Some Intel wireless adapters do not support 802.11ax. For clients to detect Wi-Fi 6 networks,
upgrade the driver for the wireless adapter to the most recent version. For more information, see
the official statement of Intel
To log in to the AP through a wireless connection:
1.
Enable WLAN on the configuration terminal and access WLAN
H3C_xxxxxx
, where
xxxxxx
is
the last six bits of the AP's MAC address.
2.
Enter
telnet wlan.h3c.com
from the CLI of the terminal.
3.
Enter the default username and password and change the default password as prompted.
Logging in from the Web interface
By default, HTTP and HTTPS are enabled and you can use the following information to log in to the
AP:
•
Username
—admin.
•
Password
—h3capadmin.
Make sure the PC obtains an IP address dynamically.
When the AP operates in cloud mode, it obtains the IP address of VLAN 1 dynamically by default.
Some Intel wireless adapters do not support 802.11ax. For clients to detect Wi-Fi 6 networks,
upgrade the driver for the wireless adapter to the most recent version. For more information, see
the official statement of Intel
To log in to the AP through a wireless connection:
1.
Enable WLAN on the configuration terminal and access WLAN
H3C_xxxxxx
, where
xxxxxx
is
the last six bits of the AP's MAC address.
2.
Visit
http://wlan.h3c.com
from a browser, and then press
Enter
.
3.
Enter the default username and password. For security purposes, change the password as
prompted after you access the Web interface, and then click
OK
.
