8
Figure 15 Cross sectional area of the AP power port and electrode connection method
Check after power-on
Examine the LEDs on the AP after you power on it to verify that the AP is operating correctly. For
more information about the LEDs, see "03-Appendix B LEDs and ports."
Connecting the AP to the network
Verifying network connectivity when the AP operates in fit
mode
When the AP operates in fit mode, all AP settings are configured on the AC. To verify network
connectivity of the AP, execute the
display wlan ap all
command on the AC. If the AP status
is
R/M
, the AP has been connected to the network.
<AC> display wlan ap all
Total number of APs: 1
Total number of connected APs: 1
Total number of connected manual APs: 1
Total number of connected auto APs: 0
Total number of connected common APs: 1
Total number of connected WTUs: 0
Total number of inside APs: 0
Maximum supported APs: 3072
Remaining APs: 3071
Total AP licenses: 128
Remaining AP licenses: 127
AP information
State : I = Idle, J = Join, JA = JoinAck, IL = ImageLoad
C = Config, DC = DataCheck, R = Run M = Master, B = Backup
AP name AP ID State Model Serial ID
ap1 1 R/M WA6120H 219801A3Q48226E00001
