Installation Manual
H3C VG 10-40/10-41 Voice Gateway
Chapter 5 Software Maintenance
5-15
Note:
z
The IP address in “IP address of the TFTP server ? [10.110.10.10]”
must be the IP address of the PC connected to the Fast Ethernet
port of the VG.
z
The IP address and subnet mask set in “This board's LAN IP
address(0.0.0.0 = RARP)? [10.110.10.13],Subnet mask for LAN (0
for none)? [255.255.0.0]” must be the IP address and subnet mask
of the LAN port.
z
The IP addresses of the PC network port and the LAN port of the
VG must be in the same network segment.
Step 3: Verify configuration parameters.
After you enter the last parameter, the following information will
be displayed, requesting you to confirm the entered parameter:
-------------------------------------------------------
---------
NETWORK INTERFACE PARAMETERS:
IP address on LAN is 10.110.10.13
LAN interface's subnet mask is 0xffff0000
HARDWARE PARAMETERS:
Processor type is MPC852T
Internal Clock Rate 50 Mhz
External Clock Rate 50 Mhz
Serial channels will use a baud rate of 9600
TFTP SERVER PARAMETERS:
IP address of the TFTP host is 10.110.10.10
The file to download and start is VG104X.BIN
