14
1.
Power on or reboot the server.
2.
When the screen is as shown in
Ctrl+I
.
Figure 20 BIOS boot screen
NOTE:
If both sSATA and SATA controllers are configured to operate in RAID mode, the prompt
Press <CTRL-I> to enter Configuration Utility
appears twice during server POST, which
corresponds to the sSATA controller and SATA controller. Select a controller according to the
drives to be configured for a RAID array.
The RSTe configuration screen as shown in
configuration screen. For how to navigate screens and modify settings, see the operation
instructions at the bottom of the screen.
Figure 21 RSTe configuration screen
Table 3 RSTe configuration screen description
Section
Description
MAIN MENU
In the
MAIN MENU
section on the upper part of the page, you can
perform the following tasks:
Summary of Contents for UniServer B5700 G3
