H3C UIS-Cell 3000 G3, User Manual

Page: 64 / 171

57
8.
Insert the riser card in PCIe riser connector 3 and fasten the captive screw to the system board,
as shown in
Figure 79 .
Figure 79 Installing the riser card
9.
Install the PCIe riser card blank, as shown in Figure 80 .
Figure 80 Installing the PCIe riser card blank
10.
Install the power supply air baffle. For more information, see " Installing air baffles ."
11.
Connect PCIe module cables, if any.
12.
Install the access panel. For more information, see " Installing the access panel ."
13.
Rack-mount the server. For more information, see " Rack-mounting the server ."
14.
Connect the power cord. For more information, see " Connecting the power cord ."
15.
Power on the server. For more information, see " Powering on the server ."